Dished End & Pressure Vessel Component Manufacturer in Thane
Motilal Group has manufactured formed pressure vessel components from Wagle Industrial Estate, Thane since 1971. The Group’s registered office and Motilal Dished End Works Pvt. Ltd. are located here.
Motilal Group in Thane
Motilal Group manufactures dished ends, cones, toriconical transitions, pressure vessels and custom formed components. In Thane, the Group operates Motilal Dished End Works Pvt. Ltd. at Plot B28, Road No. 21, Wagle Industrial Estate, Thane 400604 — the unit established in 1971, and the Group’s registered office.
Enquiries received here are served by the Group’s combined manufacturing capability across its two Indian companies: Motilal Dished End Works in Thane and Motilal Napnih Engineering Works in Gujarat. The forming equipment and capacity described on this site is distributed across those units rather than concentrated at one site, and each component is allocated to the unit suited to its size, thickness and forming route.
Motilal Group was founded in 1960 by Shri Motilal Vishwakarma, with Mr. Munnalal Vishwakarma joining in 1967. The organisation began as Motilal & Company and was later incorporated as a private limited entity in 1987. The Wagle Estate unit in Thane was added in 1971 as manufacturing capability expanded to larger diameters and thicker components.
For buyers in Thane and the wider Mumbai Metropolitan Region, this is the point of contact for enquiries, drawings and specifications. Read more about the Group’s history and operating companies.
Components Manufactured for Thane and Mumbai Region Buyers
Buyers in Thane, Mumbai and Navi Mumbai typically source formed components for process plant, storage and pressure equipment fabrication. The full range is available through the Group:
Dished Ends
Hemispherical, 2:1 ellipsoidal, torispherical and flat heads, formed in single-piece and crown-and-petal construction.
Cones & Toricones
Toriconical transitions, concentric cones, eccentric cones and conical reducers for diameter transitions in vessels and columns.
Pressure Vessels
Heat exchangers, storage vessels, reactors and process vessels manufactured to ASME and IBR requirements.
Formed Components
Pipe caps, ball valve casings, boiler components, turbine casings, tank closures and shipbuilding components.
Full specifications, materials and size ranges are listed on the products and capabilities page.
Forming Capability Available to Thane Buyers
Enquiries placed through Thane are served by the Group’s combined manufacturing capability across its Indian units. The envelope and equipment below describe Motilal Group as a whole; individual presses and furnaces are distributed between the Thane and Gujarat units and are not all located in Thane.
- Single-piece heads from 300 mm to 5,000 mm diameter, 5 mm to 100 mm thickness — hot forming from 300 mm to 3,600 mm
- Crown-and-petal construction from 200 mm to 25,000 mm diameter, 5 mm to 300 mm thickness
- Hot forming at 900–1,150 °C, warm forming at 300–700 °C, and cold forming
- Hydraulic presses up to 2,800 tons
- In-house shot blasting to SA 2.5 cleaning standard
Materials handled include carbon steel, mild steel, stainless steel, alloy steel, duplex and super duplex, chrome molybdenum vanadium, Inconel, Monel, copper, titanium, ferritic steel and clad plate. See the full equipment list and capacity range or read about the Group’s forming and fabrication capabilities.
Industries Served from Thane
Motilal Group supplies formed components into oil and gas, petrochemical, energy and power, and marine and shipbuilding applications. Thane and the surrounding Maharashtra industrial belt hold a concentration of process equipment fabricators, chemical plant operators and marine engineering firms whose requirements fall within this range.
Group-wide documented work includes a toriconical reducer manufactured for a refinery sulphur recovery unit and a 2:1 ellipsoidal dished end of 6,500 mm inside diameter produced in crown-and-petal construction with stainless clad. Manufacturing of individual components is allocated across the Group’s Indian units according to size, thickness and forming route.
Quality and Certification
Motilal Group holds an ASME Certificate of Authorization for the “U” designator, received in 2021, together with ISO 9001:2015 and ISO 45001 certification and a PESO certificate. Manufacturing is carried out to ASME, API, PED, IBR and EN requirements.
In-house testing includes ultrasonic testing, liquid penetrant testing, magnetic particle testing, hardness measurement, thickness gauging and spectrometric material analysis. Radiographic and destructive testing are outsourced where required. Every component is supplied with material traceability from mill test certificate through to dispatch. Details are on the quality management page and the QHSE page.
Thane Office and Works
Motilal Dished End Works Pvt. Ltd.
Plot B28, Road No. 21, opposite Excise Office,
Wagle Industrial Estate, Thane, Maharashtra 400604, India
Telephone: 022 2582 2580
Visit the contact page to send a drawing or specification.
Frequently Asked Questions
Does Motilal Group have a manufacturing facility in Thane?
Yes. Motilal Dished End Works Pvt. Ltd. is located at Plot B28, Road No. 21, Wagle Industrial Estate, Thane 400604. The unit was established in 1971 and the site is also the Group’s registered office.
Does Motilal Group supply buyers in Mumbai and Navi Mumbai?
Yes. Thane sits within the Mumbai Metropolitan Region, and enquiries from Mumbai, Navi Mumbai and the surrounding industrial areas are handled through the Thane office.
What is the largest dished end Motilal Group can manufacture?
Single-piece heads are formed from 300 mm to 5,000 mm in diameter. Beyond that envelope, heads are produced in crown-and-petal construction up to 25,000 mm diameter and 300 mm thickness.
Is Motilal Group ASME certified?
Yes. The Group received an ASME Certificate of Authorization for the “U” designator in 2021, authorising the manufacture of pressure vessels to ASME requirements.
What is located at the Thane site, and what is Group-wide?
Located in Thane: Motilal Dished End Works Pvt. Ltd., the unit established in 1971, and the Group’s registered office. Group-wide: the full forming envelope, press and furnace capacity, materials range and certifications, which span both the Thane and Gujarat companies. Motilal Group does not publish an equipment breakdown for each individual unit.
Can Motilal Group manufacture from our drawings?
Yes. All products are custom-manufactured to client specifications covering material grade, size and thickness, and to international codes including ASME and IBR.
Talk to Our Engineering Team
Send your drawing or specification and we will confirm whether the component falls within our forming envelope, and in which material.